112 Includes NC Winding Thermostats (40HP and greater) The foregoing facts apply particularly to general-purpose motors. Very similar to most direct driven horizontal motors. A hollow shaft vertical motor works a … 110 Usable on 380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP 3. The ValueLine product offering ranges from 5-300 HP and is compatible... Value Line Vertical Solid Shaft † Self Release Coupling can be ordered by putting an “S” on end of PN or Cat. No. Vertical motors are often configured with non-reversing ratchets which allow the motor to be operated in one direction only. Vertical AC Motor Products Custom Vertical, WPI, WPII, TEFC, 200-4160V, IEEE-841, IEEE, 112B, hollow or solid shaft - 2 - 800HP ValueLine VHS Vertical, WPI, High Efficiency, 230/460, 460 - 5 - 500HP A separate blower is available for constant torque applications. The combination of this and the varnish process provides a typical Corona Inception Voltage of 2400 volts peak with a rise time of 0.1 seconds. (713) 750-9307 - Fax, (337) 474-2344 – Phone They may not always be true in connection with special-purpose motors, built for a particular purpose, or as applied to very small motors. GE Industrial Motors a Wolong company. HP: 5-400, Inverter Duty with Bearing Fluting Protection (800) 877-7520 - Phone View in Online Catalog. (Pertains to vertical solid shaft motors only). (40HP and up) TEFC – Severe Duty, Normal Thrust AC current, Normal thrust, NEMA premium efficient, Rugged and reliable, 3 year warranty USD $4,702.00+ ALL RIGHTS RESERVED. 111 Usable on 190/380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP Ball Style NRR and SRC Upper Half Couplings, TEFC Ultra™ and Ultra+™ Couplings No. General Electric high-thrust vertical mo-tors covered by these instructions are carefully constructed of high-quality ma-terials and are designed to give long and trouble-free service when properly in-stalled and maintained. The force and direction (upward, downward, or balanced) of the applied axial load dictate the type and number of thrust bearings needed to obtain optimum performance and service life. Motor rating and identification data are furnished on label for checking purposes. HP: 5-300. Vertical Pump Motors. 40 hp, 460v, 875 rpm, siemens, 365hp ac vertical pump motor with solid shaft : 40 hp 460 volts 900 rpm siemens 365hp tefc solid 113188-000-00: 40 hp, 460v, 900 rpm, siemens, 365hp ac vertical pump motor with solid shaft The hollow shaft high thrust design is intended for deep-well pump applications. Max-E2/841 TEFC Low Voltage Hollow Shaft Product Description (116KB) MAX-PE TEFC SS Low Voltage Normal Thrust with “P” Base. Vertical solid shaft motors are produced by US Electric, General Electric, Reliance Electric, Baldor Electric, Allis-Chalmers, Siemens-Allis, and Siemens. Durable construction meets the requirements in a wide range of vertical hollow and solid shaft motor applications. Solid shaft motors are designed to operate in pump applications including in-line, booster, centrifugal, non-clog, and vertical turbines under extreme conditions for the petrochemical, pulp and paper, waste-water treatment and material processing industries. ESR Motor Systems is one of Toshiba's largest electric motor distributors in the nation. Ultra Series vertical pump motors are completely NEMA premium efficient, meeting IEEE 841 levels with a full cast iron frame, inline, high thrust, space heaters, and a non-reverse ratchet. This minimizes the impact of harmful shaft voltages. The thrust bearing is usually at the top of the motor and may consist of one or more angular contact bearings, a spherical roller bearing, or a hydrodynamic plate bearing. (409) 866-7508 - Phone ESR keeps a large inventory of Toshiba motors in Rock Hill, South Carolina. Fig. Baldor•Reliance solid shaft Vertical P-Base are the perfect power mates for centrifugal pumps, sump pumps , turbine pumps, in-line process pumps, fans, aerators , mixers, autoclaves, cooling towers and similar applications in industrial environments. GE ULTRASNOW-V Pump Motors are manufactured standard with a GEGARD2400 insulation system. This insulation system is comprised of class H materials. Vertical Solid Shaft motors feature a P-base mount for vertical mounting on in-line pump applications. Premium Efficient. HOME PRODUCTS & SERVICES DATASHEETS AC MOTORS GE MOTORS VALUE LINE VERTICAL SOLID SHAFT GE Motors List your products or services on Engineering360. Vertical Solid Shaft (128) Severe Duty (1277) IEEE 841 (719) General Purpose (490) Metric Motor (247) Explosion Proof (78) Medium Voltage (179) Inverter Duty (44) Vertical Hollow Shaft (103) About General Electric Electric Motors. A complete upgrade, Ultra Series vertical pump motors combine all the benefits of rugged and reliable XSD Ultra materials with advanced thrust and cooling technologies. GEI-M1025 5 2. Serving industries such as oil and gas, pulp and paper, mining and minerals, and water and wastewater. Stk. The combination of this and the varnish process provides a typical Corona Inception Voltage of 2400 volts peak with a rise time of 0.1 seconds. General Electric high thrust vertical motors covered by these instructions are carefully constructed of high quality materials and are designed to give long and trouble-free service when properly installed and maintained. Section VP – Vertical Pump Motors. Totally Enclosed Fan Cooled (TEFC) Pricing. ESR offers Toshiba EQP Global general purpose, severe duty, and IEEE-841 electric motors as well as explosion proof, quarry duty, inverter and vector duty, vertical solid shaft, and kiln duty motors. You can just click on the row to download any of the following files. In response to ever-demanding performance requirements of modern machinery. Notes: GE “ULTRA” VERTICAL MOTORS. There are two kinds of shafts that a vertical pump motor typically has. Featured Manufacturers: Nidec/US Motors Vertical HOLLOSHAFT motor has been a standard n the pump industry since 1922. of motor damage during shipment. These motors are available in a variety of enclosures and thrust values to suit your application. Inline … INTRODUCTION General Electric High-Thrust vertical mo-tors covered by these instructions are care-fully constructed of high-quality materials and are designed to give long and trouble- Inverter Duty Box 40443 Innovative Patented Air-Cooling Technology. Over 130 different WPI and TEFC vertical motor ratings in stock and ready to ship. Accurate mechanical lineup is essential for successful operation. Improved axial ball ratchet systems for better equipment protection, Rugged and reliable cast iron construction, Thrust capability 20% above industry standard for deep well applications, Extended bearing life able to meet 100,000-hour (~12 year) requirement. 320-449 Frame – Ball carrier shipped assembled to motor 113 Aegis Shaft Grouding ring on bearing cap (40-100HP) * Motor coupling is required and priced separately on page VP.8. * Motor coupling is required and priced separately on page VP.14. HP: 3-75, Vertical Solid Shaft Inline Motor Weather Protection I (WPI) No. Premium Efficient, † Self Release Coupling can be ordered by putting an “S” on end of PN or Cat. 3 3600 L182LP10 3.8 88.5 V768 Y 76 703 18.18 3 1800 L182LP10 4.2 89.5 V780 Y 76 1207 18.18 5 3600 L184LP10 6.1 90.2 V769 Y 101 698 18.18 5 1800 L184LP10 6.6 89.5 V781 Y 101 1200 18.18 7.5 3600 L213LP10 8.4 91 V770 Y 200 589 22.34 7.5 1800 L213LP10 9.2 … Product Name WPI Ultra™ VHS XSD Ultra™ VSS NT XSD Ultra®VHS XSD Ultra 841 VSS. Contact Information Visit our website for list of locations Fort Wayne, IN 46802 USA Phone: (800) 541-7191. Business Type: Manufacturer. (225) 292-7895 - Local 113 Aegis Shaft Grouding ring on bearing cap (40-100HP) GE ValueLine vertical hollow shaft (VHS) WPI product line is a high thrust design intended for deep-well pump applications. GE Energy ValueLine Vertical Hollow Shaft WPI NEW! A. |. 110 Usable on 380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP XSD Ultra 841 VSS Vertical Solid Shaft Inline Pump and High Thrust TEFC - 841 - Extra Severe Duty 182 - 286 Frame Dimensions 210-280 Frame – Includes integral NRR Ball Carrier with Upper Half Coupling 111 Usable on 190/380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP WT L10 Down Thrust (lbs) @ 26,280 Hrs C Dim. These motors are provided with a shaft extension suitable for coupled service and are either straight or tapered as selected by the purchaser. Steady Bushing. Premium Efficiency 111 Usable on 190/380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP 112 Includes NC Winding Thermostats (125HP and greater) Motor technology for tomorrows challenges. 110 Usable on 380 volts, 50 Hz at 1.0 Service Factor and derated to next lower HP 156 With Spherical Roller Bearing (800) 877-7520 - Phone … 2. Use flexible couplings if possible. Enclosure/Shaft Type WPI hollow shaft TEFC solid shaft TEFC hollow shaft TEFC solid shaft Speed 1200, 1800, 3600 … (225) 292-0147 - Local Also ensure that driven equipment connected to the motor shaft will not cause the motor to rotate (windmilling of fans, water flowing back through pump, etc.). Vertical Solid Shaft Motors (VSS) These motors are provided with a shaft extension suitable for direct coupled loads. • 40-100 HP, 1800RPM, 230/460V • Two Year Warranty • Higher efficiency than most competitive standard efficient motors. Beaumont, TX 77707 157 Includes Self Release Coupling (SRC) with 2 3/16” BX, Weather Protection I (WPI) These motors are generally used to drive pumps. GE Industrial Motors a Wolong Company manufactures electric motors from NEMA low voltage to medium voltage and DC motors. The standard is a solid shaft which is comparable to most other motor shafts and couple to the pump's shaft with a keyed coupling. Mechanical vibration and roughness in running the motor … 114 Insulated Upper Bearing Carrier and Aegis Shaft Grounding ring on bearing cap (125HP and greater), Totally Enclosed Fan Cooled (TEFC) GE Motors Vertical Hollow Shaft (VHS) Motors are electric motors that are intended to be used in various turbine pump applications. Ball Style NRR and SRC Upper Half Couplings, 210-280 Frame – Includes integral NRR Ball Carrier with Upper Half Coupling The design improvements result in an amazing ~30 degrees C temperature reduction helping to dramatically extend bearing and winding life. All ratings of the Ultra family are fully inverter-duty exceeding NEMA MG1-31 requirements. Vertical P-Base Motors. To … This system exceeds NEMA MG1-31 (which is 3.1 times the nameplate voltage) for motors operating on inverters. NEMA Premium, Vertical Solid Shaft High Thrust Houston, TX 77033 With a class H insulation, cast aluminum top hat, multi-direction cast in lifting lugs, oversized cast iron conduit box, aluminum anti-rodent screens and heavy-duty cast-iron frame, the WPI Ultra is the most robust vertical hollow shaft motor in the industry. Notes: 156 With Spherical Roller Bearing, Inverter Duty with Bearing Fluting Protection Rugged and reliable, the ValueLine VHS WPI is the best choice for your critical pumping applications. GE high thrust vertical pump motors have, on average, 20% higher thrust and extended performance than any other similar product in the industry. (409) 866-7544 - Fax, 6001 South Loop East The shaft can adjust without increasing temperature, vibration or noise levels. Premium Efficient, † Self Release Coupling can be ordered by putting an “S” on end of PN or Cat. Other options are available for vertical motors. Stabilizer bushings for Ultra™ TEFC shown on page VP.9. Remove rust preventative paper or slushing compound from shaft extension. No. Volts: 230/460, 460 As a result, motors in all deep well applications can be air-cooled with any bearing configuration. Vertical Solid Shaft Motors (VSS) Be sure the motor is not running and the power supply is disconnected before working on the motor. A complete upgrade, Ultra Series vertical pump motors combine all the benefits of rugged and reliable XSD Ultra materials with advanced thrust and cooling technologies. Tilting pad bearing. Stock available May 2012! These motors are generally used to drive pumps. 1. TEFC – 841 – Extra Severe Duty Vertical motors commonly have a thrust bearing and a guide bearing. (713) 750-9242 - Phone The U.S. MOTORS brand vertical hollow shaft and solid shaft pump motors have been setting the standard for the vertical turbine pump industry since their invention in 1922. (225) 292-0154 - Fax, 6554 Westwood Boulevard 114 Insulated Upper Bearing Carrier and Aegis Shaft Grounding ring on bearing cap (125HP and greater) TEFC – 841 – Extra Severe Duty Standard Efficient Motors Available to order now! GE Power Conversion. Notes: This system exceeds NEMA MG1-31 (which is 3.1 times the nameplate voltage) for motors operating on inverters. Accessories. (225) 292-9243 - Fax, 11048 Cloverland Avenue Both HOLLOW-SHAFT and SOLID-SHAFT motors are described in this in-struction book. Search in GE Motors catalogs and technical brochures on DirectIndustry and find the information you need in 1 click. (337) 474-9221 – Fax, COPYRIGHT © 2020 NATIONAL ELECTRIC MOTOR AND SUPPLY COMPANY. Just prior to actual use, unpack motor and rotate shaft by hand to see that it turns freely. Specializing in vertical turbine pumps, well drillers, pump installers, layne bowler pumps, centrifugal pumps, multisate centrifugal pump, goulds pump … They are available in Totally Enclosed Fan Cooled and Open Drip Proof enclosures with normal, medium, and high thrust capabilities. Our engineers found a better way to air cool bearings in larger frame TEFC motors. MID-AMERICA PUMP & SUPPLY is a leading distributor of pumps and pump accessories for the Agricultural, Municipal, and Industrial markets. Baton Rouge, LA 70835 Eff. Stabilizer Bushings, Ultra™ and Ultra+™ WPI/TEFC VHS Stabilizer Bushings Premium Efficient Disconnect all power to motor and accessories prior to initiating any installation, maintenance, or repairs. Company Name: General Electric. Ultra. NEMA Premium, P.O. Norm. GE pump motors are manufactured standard with a GEGARD2400 insulation system. 320-449 Frame – Ball carrier shipped assembled to motor, Weather Protection I (WPI) and Volts: 460 HP: 3-150 HP RPM NEMA Frame FLA @ NP Full Load Nom. WorldWide Electric Premium Efficient Vertical Hollow Shaft (WPEVHS) motors are designed for use in turbine pump applications, including irrigation, energy generation, mining, municipal water, and chemical applications. All ratings of the Ultra family are fully inverter-duty exceeding NEMA MG1-31 requirements. Avoid contact with rotating parts. * Motor coupling is required and priced separately on page VP.8. We are constantly making improvements in component and manufacturing standardization. Ultra™ Vertical Hollow Shaft; Ultra+™ Vertical Hollow Shaft; Ultra™ and Ultra+™ Vertical Hollow Shaft Weather Protection I (WPI) ... Vertical Solid Shaft Inline Motor TEFC – 841 – Extra Severe Duty NEMA Premium. GE 460V Totally Enclosed Fan-Cooled Enclosure Vertical Solid Shaft Motor. Vertical Solid Shaft Normal Thrust Baton Rouge, LA 70809 Known for their longevity, reliability and ease of use, our vertical HOLLOSHAFT and solid shaft pump motors can be configured to satisfy specific vertical … Ultra Series vertical pump motors are completely NEMA premium efficient, meeting IEEE 841 levels with a full cast iron frame, inline, high thrust, space … ESR Motor Systems is a leading distributor of Vertical Hollow Shaft motors and we stock a wide range of vertical motors in our warehouse in Rock Hill, SC. VERTICAL INDUCTION MOTORS HIGH THRUST HOLLOW & SOLID-SHAFT AND IN-LINE SOLID SHAFT FRAMES 182-405 NEMA P BASE TEFC & EXPLOSION-PROOF I. Weather Protection I (WPI) Both HOLLOW-SHAFT and SOLID-SHAFT motors … Cat. Totally Enclosed Fan Cooled (TEFC) TM. VHS Motors are frequently used in applications such as power generation, agricultural irrigation, deep-well pumping, critical and general pumping, and much more. Operation of General-Purpose Alternating-Current Polyphase 2, 4, and 8 Pole, 60 Hertz Integral-Horsepower Induction Motors Operated on 50 Hertz: GE high thrust vertical pump motors have, on average, 20% higher thrust and extended performance than any other similar product in the industry. MAX-PE™ TEFC Low Voltage Normal Thrust Product Description (718KB) Vertical Pump Motors. Rugged and reliable vertical motors for challenging inverter-duty applications. 51 Space Heater, 115V/60 Hz Superior Bearings - Available self-aligning spherically seated sleeve bearings allow the motor to adapt to the best position for the load. ESR Motor Systems has access to Vertical Hollow Shaft motors from several of the motor manufacturers we represent. The Ultra Series TEFC and WPI designs use many of same components and all make use of proven XSD Ultra electrical designs resulting in some of the fastest custom cycle times in the industry. As a result, motors in all deep well applications applications can be air- cooled with any bearing confi guration. Vertical Solid Shaft Motors MAX-E2/841 TEFC SS Low Voltage Normal Thrust with “P” Base.
Honda Crv 7 Seater Review 2020, Baruch College Acceptance Rate 2020, Moen Adler L82839 Parts, Bank Ledger Notebook, Physiotherapy Assistant Program,